Angular contact ball bearing
Single row angular contact ball bearing can only bear the axial load in one direction, which will cause additional axial force when it is subjected to radial load. And can only limit the shaft or shell in a direction of the axial displacement. Contact angle of angular contact ball bearing is 40 degrees, so it can take a lot of axial load. Angular contact ball bearing is a non - separation type of design, the internal and external sides of the shoulder height. In order to improve the load capacity of the bearing, the side of the shoulder is the lower, so that the bearing can be loaded into more steel balls.
Double row angular contact ball bearings can withstand larger radial load and axial joint load and torque load, limit the axial displacement of the two aspects. Mainly used to limit the axial displacement of the shaft and shell parts of the double row angular contact ball bearing, the outer ring of the tilt between the limited, allowing tilt angle depends on the internal clearance of the bearing, bearing size, internal design and role in bearing the force and torque, and the maximum allowable angle should ensure that the bearing will not produce high additional stress. If the bearing inner and outer ring between the inclined angle, will affect the bearing life, but also caused the bearing running accuracy, operating noise increases. Double row angular contact ball bearings generally used in nylon holder or brass solid cage. Double row angular contact ball bearing installation should pay attention to, while the bearing two-way axial load. But if a side ball filling gap, pay attention not to let the main axial load through a gap in the side of the ditch. In the use of bearings should pay attention to the side of the ball with the ball to the gap of the main load bearing.
Pair wise double ball bearing
If a pair of twin mounted, so that a pair of bearing outer ring relative, that is, wide end face, narrow end face narrow face. So to avoid the additional axial force, but also in the two direction of the shaft or shell limit in the axial clearance range.
Because of its inner and outer ring rolling path can have relative displacement on the horizontal axis, so it can simultaneously bear the radial load and axial load - joint load (single row angular contact ball bearings only bear a single direction axial load, so generally used in a pair of installation).
Keep the material of the frame is brass, synthetic resin, etc., in accordance with the bearing form, the use of conditions to distinguish.
Angular contact ball bearings are more foreign bearing manufacturers manufacturing, domestic more applied to imported equipment such as angular contact ball bearing 3204RS, etc.,
In the narrow side, wide, another broadside, narrow side, outside, is to contact.
Characteristic
1, general distribution of bearing
General assembly of bearings is through special processing & a
Military Specifications
Packaging
Price
Product Features
Product Performance
Prompt Delivery
Quality Approvals
Reputation
Service
Small Orders Accepted
Brand-name Parts
Country of Origin
Distributorships Offered
Electronic Link
Experienced Staff
Form A
Green Product
Guarantee/Warranty
-
International Approvals
Asia
Australasia
Central/South America
Eastern Europe
Mid East/Africa
North America
Western Europe
Payment Terms:Telegraphic Transfer (TT,T/T)
Minimum Order:10 Pieces
FOB Port:Shanghai
FOB Range: US$ 20 - US$ 200 per unit (Pieces)
Lead Time: 1 - 10 days
Any third-party trademarks or images shown here are for reference purposes only. We are not authorized to sell any items bearing such trademarks.